In chromatography, differences in the rate of movement of components of a mixture in the mobile phase, caused by interaction…
A phonocardiogram is a recording of the heart sounds and murmurs. The instrument used to make this recording is called…
The principle of operation of liquid crystal sensors is based on the fact that liquid crystals change their state in…
There are various factors that must be considered in the design and application of the electrocardiograph. These key factors must…
Biopotential amplifiers are also termed to as Bioamplifiers. Bioelectric measurements are normally low-level voltages with high source impedances therefore signal…
Q1. What are the problems encountered in biomedical measurements? The problems encountered in biomedical measurements are: Variability of variables –…
In a Biomedical measurement system, the electrodes pick up the bioelectrical potential whereas the transducer converts the physiological signal to…
The main objective of patient monitoring is to have a quantitative assessment of the important physiological variables of the patient…
Introduction Bioelectric events have to be picked up from the surface of the body before they can be put to…
Biomedical signals/physiological signals are those signals (phenomenon that conveys information) which are used primarily for extracting information on a biological…
